The Herman Miller Sayl is a great office chair. Moreover, people love it because it delivers good design, support, and exceptional value. Therefore, it is understandable that anyone would want to fix a chair that sets the reference point in its class for quality and performance. Hence, the following guide shows you how.

* This site contains affiliate links for which we may be compensated.

Herman Miller Sayl Chair Repair How to Fix Broken Sayl Chair

Herman Miller Sayl Common Problems and Fixes

Herman Miller Sayl Service Arm Replacement
Pull arm to the highest position. Using a nose plier, depress the retention clip. Pull off the retention clip. Depress the lock inward and pull the arm up to remove it. Now, remove other sidearms with the same steps. Using the T-20 Torx driver, remove arm pad screws that are four screws for the adjustable pad and 1 screw for the fixed pad. Slide pad forward and off. Place the new pad and arms on the work surface. Then set the arm in place reinstall the four Torx screws for each arm pad.

Sayl Chair Replacement of the Seat
Start the seat replacement by raising the chair to its highest position. Lay the chair on a padded surface, removing the seat lock bar by levering out on either side with a flat-bladed screwdriver. Lay the chair on the back removes the seat lock bar by prying on either side with a flat blade screwdriver. Return the chair to the upright position lift it on the seat. Slide the seat toward the back, then lift straight up to install the replacement seat. Next, lift on the lock lever, place the seat over the tracks, push toward the back, release the lever, and then slide forward. Lay the chair on the work surface with the seat in the forward position replace the seat lock bar. Finally, return the chair to the upright position. The procedure to replace a fixed seat is the same as replacing an adjustable seat, except there is no seat adjustment lever.

Unlocking Seat Depth of the Herman Miller Sayl
Besides its minimalistic construction, the most significant feature of the Sayl is the flexible webbing on the back, which offers both comfort and support. However, Herman Miller Sayl chairs parts are often easy to remove with the right tools, and make sure you have the manual handy. Stand up and on the left side, just underneath the seat. Pull up on the lever. And slide the seat forward or backward to whichever you prefer to adjust your arm heigh to whichever you prefer. Pull up at any time. You should now be able to unlock the seat depth with the aid of the right tools.

Herman Miller Sayl Gas Cylinder Replacement
If your Herman Miller Sayl chair sinks when sat in, or it no longer adjusts up or down, the piston is broken and needs to be replaced. You need a replacement spring to get your chair working like new again. Start by removing the two screws on either side of the chair. Then set the seat aside, let the chair be on its side, and use a wrench to undo the cylinder until it is loose. Next, expose the bottom of the base and use a mallet to release the cylinder. Now, replace it with a new cylinder. Then reassemble the chair.

How to Find Herman Miller Sayl Chair Local Authorized Repair Shop Near You

Authorized Dealer near you: In finding a repair shop for your Herman Miller Sayl, you could consult a nearby chair dealer. Often the dealer would be happy to help since he might win you over as a new customer. You can get the address of a nearby chair repairman, or the dealer can assist with repairs and also Sayl parts. » Herman Miller Sayl support

Place of Purchase: The best place to check for repair services is the dealer or website where you purchased the chair. They should offer a warranty that may cover the damage. Therefore, contact them. They will provide a repair service close to your current location.

Herman Miller Sayl Chair Repair – How to Fix Broken Sayl Chair

Leave a Reply

Your email address will not be published. Required fields are marked *