The Herman Miller Aeron is a great office chair that keeps you balanced and comfortable throughout the day. Moreover, people love it because it is durable and lasts long. It is therefore understandable that anyone would want to fix their favorite chair and buy parts. Hence, the following guide shows you how.
Herman Miller Aeron Chair Common Problems and Fixes
Aeron Chair Height Adjustment is Not Working
Herman Miller Aeron chairs can be a nuisance when they get stuck at a certain height. However, there is one easy fix for height adjustment. First, remove the cover of the Aeron chair controls under the seat. Next, there will be a screw within your view on top of the chair’s cylinder. All you have to do now is tighten that screw and add some lubrication or oil if necessary. But, do not overtighten the screw or loosen the screw too much. Otherwise, it will make the chair move up and down. Finally, check the chair height adjustment to see if it is functioning now.
Herman Miller Aeron Chair Tilt Repair
One option is to get a new sector gear for about $40. But a fast fix is possible if you don’t mind disassembling the chair. First, remove the 26MM hex bolts holding on the seat found on either side of the chair. Then remove the seat and the 2 Philips head screws from the bottom cover. Force open the plastic cover to see the tilt mechanisms. Next, take away the Rear limit cam and the tilt sector gear. Then, remove the clip on the Rear limit cam and remove the spring from the Sector gear. You can pull off both parts. Drill the correct size hole, such as a 10-32 screw. Then just put it all back together.
Aeron Chair Wobble Fix
If you notice something odd with your chair and it wobbles, a quick fix can save it. First, remove the Aeron chair backrest connected to the frame by four screws. Then, you will notice one screw going into each arm by the slot holding the backrest in place. Lastly, tighten or loosen each screw according to whether to tighten if wobbly or loosen or too stiff. Alternatively, Remove the Aeron chair arm pad from the top of the arm. Again, tighten or loosen both screws. Your Aeron chair arm should remain locked in position or be able to adjust easily.
How to Fix Chair Gas Cylinder
Herman Miller Aeron chairs parts are often easy to remove with the right tools, and make sure you have the manual handy. However, the first step in repairing the gas cylinder is finding a replacement. Begin by removing the two screws on either side of the chair. Then set the seat aside, let the chair be on its side, and use a wrench to undo the cylinder until it is loose. Next, expose the bottom of the base and use a mallet to release the cylinder. Now, replace it with a new cylinder. Then fix back the base, align the chair with the cylinder, and fix back the seat, making sure to screw it in properly.
How to Find Herman Miller Aeron Chair Local Authorized Repair Shop Near You
Place of Purchase: The best place to check for repair services is the dealer or the website where you purchased the chair. They should offer a warranty that may cover repair works for any damage. Therefore, contact them. They will provide a repair service close to your current location. » Herman Miller Aeron support
Internet: Use an internet search engine to find a catalog of maintenance specialists that have an online presence. You could also make your inquiries with customer service on the Herman Miller website. There are also online forums with information on how and where to fix chairs.
Authorized Dealer near you: In finding a repair shop for your Herman Miller Aeron, you could consult a nearby chair dealer. Often the dealer would be happy to help since he might win you over as a new customer. You can get the address of a nearby chair repairman, or the dealer can assist with repairs.