Need replacement parts for your SIHOO M57? This guide keeps it simple with the most common parts to check, where to buy them online, what tools you may need, and how to avoid ordering the wrong piece for your chair.
Buy SIHOO M57 Parts Online
Replace worn, cracked, loose, or wobbly armrests on the M57. Match the mounting hole pattern and left/right side before ordering because universal arm pads may not fit the M57 arm brackets. » find on amazon / find on ebay
A replacement headrest can help if the neck support is loose, cracked, missing, or no longer locks in position. Check whether you need the headrest pad, bracket, or full assembly. » find on amazon / find on ebay
Replace the wheels if the chair drags, scratches flooring, squeaks, or stops rolling smoothly. Most office chair casters use stem-style mounts, but always measure the stem before buying. » find on amazon / find on ebay
A sinking M57 usually points to a failing gas lift. Choose a heavy-duty office chair cylinder with the correct height range and taper fit for the base and mechanism. » find on amazon / find on ebay
Replace the base if a leg is cracked, bent, or no longer holds the caster tightly. Make sure the center hole accepts the same style gas cylinder. » find on amazon / find on ebay
The under-seat mechanism controls height, tilt, tension, and locking. Replace it if the chair will not recline, lock, raise, lower, or hold tension correctly. » find on amazon / find on ebay
If the lumbar support slips, cracks, or no longer adjusts, look for an M57-specific replacement. The shape and attachment points matter more than the cushion size. » find on amazon / find on ebay
Replace the seat if the mesh sags, the frame cracks, or the mounting inserts strip out. For best results, ask SIHOO for an exact M57 seat assembly. » find on amazon / find on ebay
A cracked back frame, torn mesh, or broken recline connection may require a backrest replacement. This is one part where exact model compatibility is very important. » find on amazon / find on ebay
Missing or stripped screws can make the M57 feel unstable. Use the manual to match screw locations, lengths, washers, and spare hardware before replacing anything. » find on amazon / find on ebay
If the tension knob is cracked, stuck, or stripped, the recline may feel too loose or too stiff. Match the shaft and thread style before ordering. » find on amazon / find on ebay
Replace broken levers or paddle handles if the chair no longer raises, lowers, locks, or releases tilt smoothly. Confirm whether the handle is part of the mechanism. » find on amazon / find on ebay
Buy SIHOO M57 Parts From a Local Authorized Dealer or Repairman Near You
If you want original SIHOO M57 parts, start with the official SIHOO contact page and ask for after-sales support for your exact M57 model. Include your order number, country, color, photos of the damaged part, and a short description of the issue. If SIHOO cannot ship the part directly, ask whether they can point you to an authorized seller, regional support contact, or local repair partner. For local chair repair shops, bring the chair or clear measurements so they can match the gas lift, casters, base, or tilt mechanism properly.
Tips for Ordering SIHOO M57 Replacement Parts
- Confirm that your chair is actually the SIHOO M57: SIHOO sells several similar-looking mesh ergonomic chairs, so check your order page, box label, invoice, or manual before ordering parts.
- Use the M57 manual before removing hardware: The official installation guide shows the major chair sections and screw locations, which helps you avoid mixing up bolts during repair.
- Take photos before disassembly: Photograph the armrests, mechanism, headrest bracket, lumbar support, and underside of the seat before removing anything so you can reinstall parts in the correct orientation.
- Measure the gas lift carefully: If your M57 sinks, measure the full cylinder height, exposed piston, and taper fit. A generic cylinder may work, but the wrong height can make the chair sit too high or too low.
- Check armrest mounting holes: The M57 uses adjustable armrests, so do not buy only a soft arm pad unless your original bracket is still good and the pad mounting pattern matches.
- Do not assume M18, M56, M57C, or M90 parts fit: Some SIHOO chairs share similar styling, but backrest frames, lumbar pieces, arm brackets, and seat mounts can be different.
- Keep the original screws if possible: Reuse factory bolts when they are not stripped, because they are already matched to the chair frame and threaded inserts.
- Ask SIHOO for the part name: If the broken part is unusual, send SIHOO a photo and ask what the exact part is called before searching Amazon or eBay.
- Compare the chair color: Some M57 replacement pieces may come in black, gray, or other finishes. Match the color if the part is visible, especially armrests, headrest, and back frame parts.
- Replace safety-related parts instead of patching them: A cracked base, failing cylinder, broken back support, or damaged tilt mechanism should be replaced rather than glued or temporarily fixed.
Tools Needed to Repair SIHOO M57
- Allen Wrench Set: Useful for removing and reinstalling the M57 armrests, seat screws, backrest screws, and other hex bolts used during assembly.
- Metric Socket Wrench Set: Helpful if any bolts under the seat or mechanism are easier to remove with a socket instead of a small hand tool.
- Rubber Mallet: Helps loosen a stuck gas lift or caster without damaging the base as badly as a metal hammer might.
- Pipe Wrench: Often used to grip and twist out a stuck gas cylinder from the tilt mechanism. Wrap the area if you want to reduce scratches.
- Office Chair Cylinder Removal Tool: Makes gas lift removal easier if the old cylinder is seized inside the base or mechanism.
- Screw Extractor Set: Useful if an M57 screw head is stripped and cannot be removed with the original Allen key.
- Blue Threadlocker: Helps stop frequently used bolts from loosening again, especially around armrests, the seat plate, and backrest mounting points.
- Tape Measure: Needed for measuring caster stems, gas lift height, screw length, and part spacing before ordering replacements.
- Work Gloves: Protects your hands while handling metal chair parts, springs, the gas cylinder, and the underside of the seat.
- Plastic Pry Tools: Helpful for removing small covers or trim pieces without scratching visible plastic areas on the chair.
SIHOO M57 Diagram & Manual
You can find official SIHOO M57 diagrams, assembly files, product media, and user manual resources on the SIHOO M57 Series resource page. SIHOO also provides an official M57 Series User Manual PDF, which is the best place to check the chair layout, installation order, safety notes, and included hardware. Before ordering replacement parts, compare your chair with the manual so you know whether you need the headrest, backrest, armrest, seat, base, gas lift, casters, or under-seat mechanism.
How to Prevent Damage to SIHOO M57 Parts
- Do not force the recline lock: If the M57 recline lever feels stuck, stop and inspect the mechanism instead of forcing the handle until it snaps.
- Avoid sitting on the front edge only: Repeated pressure on the front of the mesh seat can stress the seat frame and make the chair feel loose over time.
- Keep the caster wheels clean: Hair, dust, and small debris can jam the casters and put extra strain on the wheel stems and five-star base.
- Use the chair on a suitable floor surface: Rough flooring can wear down the M57 casters faster. Use a chair mat if the wheels drag or catch.
- Do not use the armrests to lift the whole chair: The M57 armrests are adjustable support parts, not carry handles. Lift from the base or seat frame instead.
- Retighten bolts after the first few weeks: After assembly or repair, check the seat, armrest, and backrest bolts because new parts can settle after regular use.
- Do not overload the chair: Staying within the chair’s rated capacity helps protect the gas lift, tilt mechanism, base, casters, and seat frame.
- Adjust the lumbar support gently: Move the lumbar piece using normal pressure only. Forcing it past its adjustment range can crack the support or slider.
- Keep the mesh away from sharp objects: Keys, tools, pet claws, and sharp desk edges can snag or tear the M57 mesh seat or backrest.
- Store spare screws safely: The M57 manual may include extra hardware. Keep spare bolts in a labeled bag so you can use the correct replacement later.
SIHOO M57 Parts FAQ
Where can I buy original SIHOO M57 replacement parts?
The best first step is contacting SIHOO directly through the official contact page. Send your chair model, order number, country, and photos of the damaged part so they can confirm whether an original M57 replacement is available.
Can I use universal office chair parts on the SIHOO M57?
Sometimes, yes. Universal casters, gas cylinders, and some tilt mechanisms may work if the size and mounting pattern match. Model-specific parts like the headrest, backrest, lumbar support, seat frame, and armrest brackets should be matched more carefully.
Why does my SIHOO M57 keep sinking?
A sinking SIHOO M57 usually means the gas lift cylinder is failing. Replacing the cylinder is the usual repair, but you should measure the old cylinder and confirm the fit before ordering a replacement.
Can I replace only the SIHOO M57 arm pads?
You can replace only the arm pads if the pads are removable and the screw pattern matches. If the height, slide, or pivot function is broken, you may need the complete armrest assembly instead.
Are SIHOO M57 and SIHOO M57C parts the same?
Do not assume they are the same. The names are similar, but parts may differ depending on the model version, region, and production batch. Compare the manual, photos, and mounting points before ordering.
How do I know which screw goes where on the SIHOO M57?
Check the official M57 Series User Manual before reinstalling hardware. The manual shows the assembly order and helps you identify which screws belong to the backrest, armrests, seat, and mechanism.
Can I repair torn mesh on the SIHOO M57?
Small snags may be manageable, but torn or sagging mesh is usually difficult to restore properly. For a clean and safe repair, replacing the seat or backrest mesh assembly is usually better than patching it.
What should I do if the SIHOO M57 recline stops working?
Check the tilt lock handle, tension knob, and under-seat mechanism first. If the lever moves but the chair does not recline or lock correctly, the tilt control mechanism may need adjustment or replacement.
Can I replace SIHOO M57 wheels with rollerblade-style casters?
Yes, if the caster stem size matches your chair base. Rollerblade-style casters can roll smoother, but always confirm the stem diameter and length before buying because the wrong stem may feel loose or not fit.
Is it worth repairing a SIHOO M57 instead of buying a new chair?
It depends on the part. Replacing casters, screws, arm pads, or a gas lift is usually affordable. If the backrest frame, seat frame, and mechanism are all damaged, replacing the chair may make more sense.
Summary
The SIHOO M57 is usually worth repairing when the problem is a common part like the gas lift, casters, armrests, screws, or tilt mechanism. For model-specific parts, contact SIHOO first and use the official manual to confirm what you need. Take photos, measure carefully, and avoid guessing between similar SIHOO models. That simple step can save you from ordering parts that look right but do not actually fit.
Besitu 500Lbs Office Chair Replacement Parts, w/ 6'' x 10.2" Mounting Holes Chair Base Heavy Duty Plate Swivel Tilt Control Seat Mechanism for Executive and Gaming Chairs
Omyoffice 5.5” Office Chair Gas Lift Cylinder Replacement, Class 4 Piston
