Dealing with a broken HON Ignition chair? Whether it’s a sinking seat, a jammed tilt, or noisy wheels, this guide covers quick fixes and part replacements to get your chair back in action. Save time and money by handling common HON Ignition repairs yourself with a few simple tools.
Quick Fix to Common HON Ignition Problems
Chair Keeps Sinking: The gas lift cylinder is likely worn out. Replace it with a new gas lift cylinder. Be sure to check the size compatibility. You can use a rubber mallet and pipe wrench for safe and easy installation.
Tilt Lock Not Working: The tilt mechanism may be jammed or damaged. Apply silicone lubricant spray to moving parts and adjust the tension knob slowly. If the issue persists, a full mechanism replacement may be necessary.
Wobbly Armrests: Check and tighten all mounting screws with a screwdriver set. If the wobble remains, inspect for stripped screws or broken brackets and consider replacing the armrest assembly.
Stiff Recline Function: Over time, dust and tension can make reclining hard. Loosen the tension adjustment and apply WD-40 or silicone spray to the tilt mechanism. Regular maintenance helps prevent this issue.
Noisy Wheels: Dirty or worn casters can squeak and drag. Clean the wheels or swap them for smooth-rolling replacement casters. Choose soft rubber wheels to protect floors and reduce noise.
Loose Seat Plate: A loose seat plate can cause rocking or instability. Tighten bolts with a wrench and apply threadlocker if needed. If cracked, replace the seat plate with a compatible seat plate assembly.
How much does it cost to repair a HON Ignition?
- Gas Lift Cylinder Replacement: $20–$35 depending on size and quality. Most users can install it with basic tools at home.
- Tilt Mechanism Repair: $40–$80 for a replacement mechanism. Labor cost from a repair tech may add $50–$100.
- Armrest Replacement: $30–$50 for a pair of universal or compatible armrests. OEM options may cost more if available.
- Caster Replacement: $15–$30 for a full set of wheels. Easy to install without special tools.
- Seat Plate Repair: $25–$45 for the part alone. If cracked or stripped, replacement is recommended over repair.
- Professional Tune-Up: $60–$100 for a complete inspection, lubrication, and tightening by a service provider.
Order Parts for Your Broken HON Ignition
- Amazon: Offers a variety of universal parts like gas lifts, casters, and tilt mechanisms. Browse HON chair parts
- HON Official Support: Contact HON directly for OEM parts and warranty replacements. Visit HON support page
- eBay: Source for both new and used HON parts, including discontinued components. Search eBay listings
- Commercial Office Dealers: Many authorized furniture dealers carry HON parts and may offer in-house repair services.
For the best fit and quality, start with HON directly or verified sellers. Third-party options can be budget-friendly but may not offer exact matches or warranty coverage.
HON Ignition Repair & Service Center Near You
To find a HON Ignition chair repair or service center near you, visit the official HON contact page. Provide your chair model and issue for assistance locating a certified repair provider or ordering replacement parts directly. Contact HON Support Here
Warranty Coverage for HON Ignition
HON Ignition chairs are backed by the HON Full Lifetime Warranty, covering defects in materials and workmanship for the life of the product. This includes components like the frame, casters, armrests, and tilt mechanisms. Certain exclusions apply, such as normal wear and tear. View full warranty details here
HON Ignition Diagram & Manual
For official HON Ignition chair manuals and diagrams, visit the HON Ignition product page. It provides downloadable manuals and step-by-step videos to assist with setup, adjustments, and maintenance. This resource is essential for ensuring proper assembly and understanding your chair’s features. Access the official HON Ignition Chair manual here
Tips to Make Your HON Ignition Last Longer
- Use a Chair Mat: Reduce wear on casters and flooring by placing a chair mat under your chair, especially on hard surfaces.
- Clean and Dust Weekly: Use a soft cloth or compressed air duster to remove dirt from tilt and swivel mechanisms.
- Lubricate Moving Parts: Apply a silicone spray to keep joints and casters moving smoothly and quietly.
- Tighten Hardware: Regularly check and tighten screws and bolts using a reliable screwdriver set to prevent wobbling or structural damage.
- Stay Within Weight Limits: Avoid damage to the frame or gas lift by respecting the chair’s weight capacity.
- Adjust Settings Gently: Use tilt and height levers carefully to avoid overstraining mechanical parts.
- Store in Dry Area: Keep your chair in a dry environment to prevent rust or material deterioration over time.
Conclusion
Fixing your HON Ignition chair isn’t rocket science. With a little effort (and maybe some WD-40), you’ll have it feeling brand new again. Don’t ditch a good chair—most issues are easy to fix with the right parts and a YouTube video or two. Your back—and your wallet—will thank you.
