The Haworth Fern is a comfy workhorse—and most wear-and-tear fixes are simple swaps. Use this cheat sheet to identify parts, then price-check with a quick search for Haworth Fern parts on Amazon so you’re back in the groove fast.
Buy Haworth Fern Parts Online
The classic “sinking seat” fix. Swap the cylinder to restore smooth, stable height adjustment. » find on amazon / find on ebay
Cracked foot or wobbly hub? Replace the entire base. Verify hub bore (often 50mm) and caster stem size for a perfect fit. » find on amazon / find on ebay
Smoother roll, happier floors. Match stem (commonly 11mm x 22mm) and choose soft treads for hard surfaces. » find on amazon / find on ebay
Feeling play or clunks under the seat? The control plate may be worn. Match bolt pattern and cylinder taper before ordering. » find on amazon / find on ebay
Torn or flattened arm caps? Easy comfort upgrade—just match the hole spacing (often ~100mm). » find on amazon / find on ebay
If height or pivot won’t hold, swapping the whole arm assembly is the clean fix. Confirm side and bracket style. » find on amazon / find on ebay
A telescoping cover keeps grease off clothing and dust off seals—choose a height that matches your cylinder’s stroke. » find on amazon / find on ebay
Missing screws after a move? Grab a mixed kit for seat-plate bolts and washers. Add threadlocker on final assembly. » find on amazon / find on ebay
Buy Haworth Fern Parts From a Local Authorized Dealer or Repairman Near You
For Fern-specific components (the flexible back “spine,” lumbar bits, or arm internals), talk to Haworth first—OEM guidance prevents guesswork. Have photos, your config (with/without headrest, arm type), and measurements ready so they can confirm part numbers. Start with Haworth’s official pages: the Fern product page for specs and the Find a Dealer tool for local sourcing and service.
Tips for Ordering Haworth Fern Replacement Parts
- Measure before you buy: cylinder length/taper, caster stem (diameter/length), seat-plate bolt pattern.
- Confirm your variant (arms/headrest options) because hardware can differ.
- Buy casters in a matched set of five to keep seat height even.
- Heavier users may prefer heavy-duty cylinders and metal bases.
- Keep original fasteners; many replacement parts ship without hardware.
- Use medium threadlocker and re-torque after a week of use.
Tools Needed to Repair Haworth Fern
- Metric hex key set: Handles arm and seat-plate bolts (see hex key sets).
- Phillips screwdriver: For covers and small screws (precision sets).
- Adjustable wrench / sockets: Hold nuts under the mechanism (wrenches).
- Rubber mallet: Breaks the cylinder’s taper fit (rubber mallets).
- Penetrating oil: Frees seized parts—apply and wait (penetrating oils).
- Digital calipers: Confirms stems and bolt spacing (digital calipers).
Haworth Fern Diagram & Manual
Haworth lists specs and documentation on the official Fern page—look for “Resources” or “Downloads” for assembly and care details. Start here: Haworth Fern – Official Page. Use those diagrams while ordering to verify part orientation and bolt patterns.
How to Prevent Damage to Haworth Fern Parts
- Dial tilt tension to avoid slamming into end stops.
- Clean casters monthly; hair and grit destroy bearings and scratch floors.
- Don’t push off the armrests when standing—that torques brackets.
- Re-check seat and arm hardware after moves and every few months.
- Use a chair mat on carpet to reduce caster drag and base stress.
- Wipe the cylinder/shroud to keep grit off seals and finishes.
Conclusion
Measure, match, and swap—Fern repairs are refreshingly straightforward. Keep the official page open, threadlock the important bolts, and scan Amazon results to grab quality replacements without overthinking it.
