Haworth Very Repair – Fix Broken Haworth Very

The Haworth Very is a solid task chair, but parts can still wear out, loosen, squeak, or stop adjusting over time. This guide walks you through the most common Haworth Very repair issues, what to check first, what parts may need replacing, and where to get help.

Quick Fix to Common Haworth Very Problems

Haworth Very seat will not raise or lower: If your Haworth Very sinks, will not stay up, or feels stuck at one height, the pneumatic cylinder is usually the first part to inspect. Make sure the height lever is not bent or disconnected under the seat. If the chair slowly drops while sitting, replace the gas lift with a compatible office chair gas lift cylinder.

Haworth Very armrests feel loose or wobbly: The Very chair can come with adjustable arms, and repeated height or width adjustments may loosen the arm pad screws or arm bracket hardware. Turn the chair sideways, check the underside of each arm, and tighten the screws evenly. If the pads are cracked or peeling, look for compatible office chair arm pad replacements.

Haworth Very recline feels too loose or too stiff: If the back recline on your Haworth Very feels uncontrolled, stiff, or uneven, first adjust the tilt tension knob or control. Very models can have different mechanism options, so compare the controls to your exact chair. If the tension no longer changes anything, the tilt mechanism may be worn and should be inspected before replacing.

Haworth Very backrest will not stay secure: A loose back on the Haworth Very can come from worn back mounting hardware, loose screws, or damage near the back frame connection. Stop using the chair if the back moves side-to-side heavily. Tighten the back attachment points carefully, but avoid overtightening into plastic or composite areas because that can strip the mounting points.

Haworth Very lumbar support feels uneven: If your Very has adjustable lumbar support and it feels crooked, stuck, or no longer supportive, check that the lumbar piece is seated correctly on both sides of the back frame. Dust and pressure can make the slider bind. Clean the track area gently and move the lumbar through its full range to see if it resets.

Haworth Very seat depth adjustment is stuck: Some Haworth Very task chairs include seat depth adjustment. If the seat pan will not slide, check underneath for debris, a jammed release paddle, or a loose cable. Do not force the seat forward because the track or release bracket can crack. Clean the rails and inspect the release mechanism before replacing parts.

Haworth Very casters do not roll smoothly: If the Very chair drags, scratches the floor, or rolls unevenly, remove each caster and check for hair, carpet fiber, grit, or bent stems. Clean the wheels first. If the chair is used on hard floors, consider replacing worn casters with smooth-rolling office chair caster wheels.

Haworth Very makes clicking or popping noises: Clicking from a Haworth Very often comes from the tilt mechanism, cylinder socket, caster base, or seat frame hardware. Flip the chair over and tighten visible fasteners. If the sound happens only when reclining, the tilt control or back connection may need service. Avoid spraying lubricant into unknown mechanism openings.

Haworth Very mesh back is sagging or damaged: The Very chair is known for its open, breathable back style. If the mesh or back material is torn, sagging, or separated from the frame, it usually needs a replacement back assembly rather than a quick patch. Contact Haworth or an authorized dealer because the back shape and mounting points are model-specific.

Haworth Very seat cushion is flat or uncomfortable: If the seat foam feels compressed, uneven, or hard after years of use, the cushion may be worn. Check whether the upholstery is removable or if the entire seat assembly needs replacement. Temporary cushions can help, but a proper Haworth Very seat replacement gives the best fit and height accuracy.

Haworth Very base feels unstable: If the five-star base rocks or one leg looks bent, stop using the chair until it is checked. A damaged base can make the chair unsafe. Remove the cylinder and inspect the hub and caster sockets. If any part is cracked, replace the base with a compatible office chair base replacement.

Haworth Very tilt lock does not hold: If the recline lock releases by itself or will not lock at all, the problem may be a loose lever, worn lock plate, or damaged control mechanism under the seat. First check that the lever is fully engaging. If the lever moves but nothing catches, the mechanism may need replacement or dealer service.

How much does it cost to repair a Haworth Very?

• Gas lift cylinder replacement: Usually around $35 to $90 for the part, or $80 to $180 if a local chair repair shop installs it. This is one of the most common Haworth Very repairs when the chair sinks or will not hold height.
• Replacement caster wheels: Usually around $20 to $60 for a set of five standard replacement casters. Premium rollerblade-style casters may cost more. Always check the caster stem size before ordering because the wrong stem will not lock into the Haworth Very base properly.
• Arm pad or arm assembly repair: Arm pad replacements may cost around $25 to $80 depending on size and compatibility. A full adjustable arm assembly can cost more, especially if ordered through an authorized Haworth dealer.
• Seat cushion or seat pan replacement: A replacement seat assembly for a Haworth Very can cost around $100 to $250 or more depending on upholstery, color, foam, and whether the part is ordered new, used, or through a dealer.
• Backrest or back frame replacement: A Very back replacement can cost around $125 to $350 or more, especially if the mesh, frame, lumbar, or back mounting hardware is damaged. This is usually a model-specific part, so avoid guessing with universal parts.
• Tilt mechanism repair: A basic tilt mechanism replacement may cost around $60 to $160 for the part, but Haworth Very mechanisms can vary by chair configuration. Labor can bring the total closer to $120 to $300.
• Professional inspection or tune-up: A local office chair technician may charge around $50 to $125 to inspect, tighten, lubricate appropriate points, and diagnose a Haworth Very. This is useful when the chair has several small issues at once.
• Dealer-supplied OEM parts: OEM Haworth Very parts may cost more than aftermarket chair parts, but they are usually the better choice for the back, seat, arms, and mechanism because those parts need to match the exact Very configuration.

Order Parts for Your Broken Haworth Very

• Haworth authorized dealers: Best option for model-specific parts such as the Very back assembly, seat assembly, arm assembly, lumbar parts, and tilt control components.
• Haworth customer support: Useful if you are not sure which generation or configuration of Haworth Very you own. They may ask for labels, order details, photos, or serial information.
• Office furniture liquidators: Good for used Haworth Very parts, especially if you need a matching back, seat, arms, or base from a donor chair.
• Amazon replacement parts: Better for more universal items such as chair casters, gas lift cylinders, chair bases, cylinder removal tools, and general repair tools.

Before ordering parts for a broken Haworth Very, flip the chair over and look for the product label under the seat. Take clear photos of the chair, the broken part, the underside mechanism, and the label. Haworth Very chairs can have different arm styles, back options, lumbar options, bases, and mechanisms, so the safest approach is to match the exact part instead of buying a random “universal” replacement.

For general repair parts, you can search for office chair parts, office chair cylinder removal tools, office chair caster wheels, and office chair gas lift replacements. For the seat, back, arms, and tilt controls, contact Haworth or a dealer first because those parts are more specific to the Haworth Very design.

Haworth Very Repair & Service Center Near You

The best place to start for Haworth Very repair help is the official Haworth dealer locator. Haworth dealers can help identify the chair, order compatible parts, check warranty options, and point you toward local service if repair is available in your area. You can use the official Haworth dealer locator here: Haworth Dealer Locator.

If you are outside North America, visit your regional Haworth website and choose the dealer, showroom, or contact option for your country. When contacting Haworth or a dealer, include photos of the whole chair, the damaged area, the underside label, and a short explanation of what the chair does or does not do.

Warranty Coverage for Haworth Very

Warranty coverage for a Haworth Very depends on when and where the chair was purchased, whether it was bought new from Haworth or an authorized dealer, and whether the issue is considered a covered defect or normal wear. Haworth publishes its current warranty information on the official warranty page here: Haworth Warranty.

In general, warranty claims are more likely to apply when the chair has a manufacturing or workmanship defect under normal use. Warranty coverage usually does not apply to normal wear and tear, misuse, accidental damage, unauthorized modifications, improper repairs, or damage caused by using the chair outside its intended purpose. If your Haworth Very is still under warranty, avoid taking the chair apart heavily before speaking with Haworth or an authorized dealer.

For a warranty claim, prepare the purchase receipt, dealer information, product label, photos, and a clear description of the failure. If the chair was purchased used, refurbished, or from a liquidation source, warranty coverage may be limited or unavailable, but Haworth or a dealer may still help you identify replacement parts.

Haworth Very Diagram & Manual

For adjustment instructions, diagrams, and product documents, use Haworth’s official document resources. Haworth has a Very office chair user guide available through its official resource page here: Haworth Very User Guide.

You can also search Haworth’s official document library for installation instructions, technical documents, and service-related PDFs here: Haworth Documents. Search for “Very” and compare the document to your exact chair type because Very task chairs, conference chairs, stools, and other Very-family seating may use different parts.

Tips to Make Your Haworth Very Last Longer

• Use the correct adjustments instead of forcing the chair: The Haworth Very has adjustment controls that should move smoothly. If the seat depth, arms, tilt, or lumbar support gets stuck, do not force it. Check the user guide and inspect for debris or misalignment first.
• Keep the mesh back clean: Dust and lint can collect in the Very back material and lumbar area. Vacuum it gently with a brush attachment and avoid harsh chemicals that can weaken the mesh or discolor the back frame.
• Check arm hardware every few months: Adjustable arms get moved often, so the screws and brackets can loosen over time. Light tightening can prevent wobble from turning into cracked arm mounts or stripped threads.
• Do not lean heavily on one armrest: The Haworth Very arms are made for arm support, not for lifting your full body weight every time you stand. Pushing hard on one side can loosen or damage the arm assembly.
• Clean casters before they damage the base or floor: Hair, dust, and grit can jam the caster wheels. Remove buildup regularly so the chair rolls smoothly and does not put extra stress on the base.
• Avoid dropping into the seat: Sitting down hard can shorten the life of the cylinder, seat pan, and tilt mechanism. The Very is a commercial-grade chair, but repeated impact still wears out parts faster.
• Keep the chair on a suitable surface: Use the right casters for carpet or hard flooring. Wrong casters can make the chair unstable, noisy, or harder to move, which adds stress to the base and cylinder.
• Inspect the back connection if the chair starts creaking: A small creak from the Very back area can become a bigger backrest issue if ignored. Check the mounting points and contact a dealer if the back feels loose.
• Do not use random universal parts for the seat or back: Universal gas cylinders and casters may work in some cases, but the Very seat, back, arms, and control mechanism are more model-specific. Match those parts carefully.
• Save the product label information: Take a photo of the underside label while it is still readable. This makes it much easier to order Haworth Very parts later.

Broken Haworth Very Repair FAQ

Why does my Haworth Very chair keep sinking?

A sinking Haworth Very usually means the gas lift cylinder is worn out. First check that the height lever is not stuck or pressing on the cylinder release. If the chair slowly drops while you sit, the cylinder likely needs replacement.

Can I replace the Haworth Very gas cylinder myself?

Yes, many people can replace the cylinder with basic tools, but removing an old stuck cylinder can be difficult. A cylinder removal tool, rubber mallet, or pipe wrench may help. Be careful not to damage the mechanism or base.

Are Haworth Very parts universal?

Some parts, such as many casters and gas lift cylinders, may be close to universal if the sizes match. However, the seat, back, arm assemblies, lumbar support, and tilt mechanism are usually specific to the Haworth Very model and configuration.

Why is my Haworth Very backrest loose?

A loose Very backrest can come from loose mounting screws, worn back hardware, or damage at the back frame connection. Stop using the chair if the back feels unsafe. Tighten visible hardware carefully and contact Haworth or a dealer if the frame is damaged.

How do I fix squeaking on a Haworth Very?

Find where the squeak comes from first. Common areas include the cylinder socket, tilt mechanism, caster stems, arm mounts, and back connection. Tighten loose hardware and clean debris. Avoid spraying lubricant into the mechanism unless you know the correct contact point.

Can I replace the Haworth Very seat cushion?

Yes, but the best replacement is usually an OEM or matching Haworth Very seat assembly. The seat shape, upholstery, mounting holes, and seat depth hardware need to match your chair. Contact a Haworth dealer with your chair label and photos.

What should I do if the Haworth Very seat depth adjustment is stuck?

Check underneath the seat for a jammed lever, debris in the rails, or a disconnected release cable. Do not force the seat pan forward or backward. If the release mechanism is damaged, the seat assembly or control parts may need service.

Can I buy Haworth Very replacement arms?

Replacement arms may be available through Haworth, authorized dealers, used office furniture sellers, or donor chairs. Match the exact arm style because Haworth Very chairs can have different arm configurations and mounting hardware.

Is it worth repairing a Haworth Very chair?

Yes, it is often worth repairing if the frame, back, and seat are still in good condition. Replacing casters, a cylinder, or arm pads is usually much cheaper than buying a new ergonomic chair. If the back frame or mechanism is badly damaged, compare repair cost against replacement value.

Where can I find the Haworth Very manual?

You can find the Haworth Very user guide and related documents through Haworth’s official document resources. Use the official Haworth Very user guide or search Haworth’s document library for “Very” to find the correct file for your chair type.

Does Haworth warranty cover a broken Very chair?

It depends on the purchase date, region, original buyer status, and the type of damage. Manufacturing or workmanship defects may be covered, while normal wear, misuse, accidental damage, and unauthorized modifications are usually not covered. Check Haworth’s official warranty page or ask an authorized dealer.

Why does my Haworth Very tilt lock not work?

If the tilt lock lever moves but the chair will not lock, the lever, cable, lock plate, or tilt mechanism may be worn or disconnected. Check the underside control first. If the locking parts are damaged, the mechanism may need replacement.

Summary
The Haworth Very is usually worth fixing when the main frame, seat, and back are still solid. Start with simple checks like loose screws, dirty casters, stuck levers, and worn cylinders before replacing bigger parts. For model-specific items like the back, seat, arms, and tilt mechanism, use Haworth or an authorized dealer so you get the right fit.